Publication

原著論文

1. Taki K, Sugiyama T, Ohara M, et al. Online Monitoring of the Degree of Fill in a Rotating Full-Flight Screw of a Corotating Twin-Screw Extruder. AIChE Journal. 2018, Published on-line;0(0).
2. Taki K, Yamada R. Comparison of the Degree of Shrinkage Under Air and Nitrogen Atmospheres by Laser Displacement Sensor. Journal of Photopolymer Science and Technology. 2018;31(4):497-501.
3. Taki K, Suenaga H, Ito H. Effect of thermal annealing on crystallinity and mechanical strength of textile glass and carbon fiber reinforced in situ polymerized ϵ-caprolactam parts. Microsystem Technologies. 2018;24(1):663-668.
4. Taki K, Kawaseki T, Isawa T, Mizoguchi A. Lateral Patterning of Porous Polyimide Film by Exposure to High-Pressure CO2 and UV light with Photomask. Journal of Photopolymer Science and Technology. 2018;31(4):473-478.
5. Ninomiya K, Abe M, Tsukegi T, et al. Lignocellulose nanofibers prepared by ionic liquid pretreatment and subsequent mechanical nanofibrillation of bagasse powder: Application to esterified bagasse/polypropylene composites. Carbohydrate Polymers. 2018/02/15/ 2018;182(Supplement C):8-14.
6. Kentaro T, Sawa K. Hybrid UV LED Device for Simulating Spectrum of High-Pressure Mercury Lamp: Evaluation in UV Curing Process. Journal of Photopolymer Science and Technology. 2018;31(6):753-757.
7. Asuka T, Sachiyo U, Ryouta H, Kentaro T, Takahiro K. Relationship between C=C double bond conversion and dissolution kinetics in cross-linking-type photoresists for display manufacture, studied by real-time Fourier transform infrared spectroscopy and quartz crystal microbalance methods. Jpn. J. Appl. Phys. 2018;57(9):096501.
8. Taki K, Watanabe Y, Tanabe T, Ito H, Ohshima M. Oxygen concentration and conversion distributions in a layer-by-layer UV-cured film used as a simplified model of a 3D UV inkjet printing system. Chemical Engineering Science. 2017;158:569-579.
9. Taki K, Taguchi T, Hayashi R, Ito H. Comparison of Networks Structure Photopolymerized under UV-LED and High-Pressure Mercury Lamp with Different Photoinitiators. Journal of Photopolymer Science and Technology. 2017;30(4):413-419.
10. Taki K, Niinuma K, Hariu A, Ito H. Antiglare Layer Formation on Polycarbonate Sheet Using UV-Curable Resin-induced Crystallization and Subsequent CO2 Gas Foaming. Journal of Photopolymer Science and Technology. 2017-01-10 23:31:32 2017;30(2):235-240.
11. Taki K, Isawa T, Mizoguchi A. Controlling the Pore Structure of Polyimide Films Prepared by Exposure to High-Pressure CO2 and UV Light. Journal of Photopolymer Science and Technology. 2017;30(6):619-625.
12. Ninomiya K, Abe M, Tsukegi T, et al. Ionic liquid pretreatment of bagasse improves mechanical property of bagasse/polypropylene composites. Industrial Crops and Products. 2017/12/15/ 2017;109:158-162.
13. Taki K, Taguchi T, Hayashi R, Ito H. Photopolymerization kinetics of different chain sizes of bi-functional acrylic monomers using real time FT-IR. Journal of Photopolymer Science and Technology. May 24 (accepted) 2016;29(1):133-137.
14. Taki K, Shoji N, Kobayashi M, Ito H. A kinetic model of viscosity development for in situ ring-opening anionic polymerization of ϵ-caprolactam. Microsystem Technologies. July 06 2016;23(5):1161-1169.
15. Taki K, Mizoguchi A, Ito H. Cover-layering a Porous Polyimide Flexible Print Circuit with a Porous Polyimide Layer. Journal of Photopolymer Science and Technology. June 15 2016;29(3):459-464.
16. Taki K, Kondo S, Ito H. Effects of UV Intensity, Line-speed, and Light distribution on Conversion and Surface Elastic Modulus of Roll-to-roll UV-cured Film. Journal of Photopolymer Science and Technology. 2016-11-26 00:30:20 2016;29(6):835-940.
17. Taki K, Nakamura S, Takayama T, Nemoto A, Ito H. Direct joining of a laser-ablated metal surface and polymers by precise injection molding. Microsystem Technologies. 2015/08/01 2015;22(1):31-38.
18. Taki K, Ito H. Development of a High-Intensity UV Exposure Apparatus under a High-Pressure CO<sub>2</sub> Gas Atmosphere to Manufacture Large-Area Porous Ultralow-k Polyimide Substrates for Flexible Print Circuits. Journal of Photopolymer Science and Technology. 2015;28(6):747-754.
19. 志賀野明, 高山哲生, 瀧健太郎, 伊藤浩志. ポリプロピレン/モンモリロナイト複合材料の力学特性に及ぼす炭酸カルシウム微粒子分散の影響. 日本機械学会論文集 B. Nov 25 2014;80(819):14-00274.
20. Taki K, Watanabe Y, Ito H, Ohshima M. Effect of Oxygen Inhibition on the Kinetic Constants of the UV-Radical Photopolymerization of Diurethane Dimethacrylate/Photoinitiator Systems. Macromolecules. 2014;47(6):1906-1913.
21. Taki K, Hayashizaki H, Fukada K. A Simplified Bubble Nucleation, Growth and Coalescence Model for Coke Production Process. ISIJ International. 2014;54(11):2493-2502.
22. Ito A, Semba T, Taki K, Ohshima M. Effect of the molecular weight between crosslinks of thermally cured epoxy resins on the CO2-bubble nucleation in a batch physical foaming process. Journal of Applied Polymer Science. June 15 2014;131(12):40407.
23. Taki K, Hosokawa K, Takagi S, Mabuchi H, Ohshima M. Rapid production of ultralow dielectric constant porous polyimide films via CO2-tert-amine zwitterion induced phase separation and subsequent photopolymerization. Macromolecules. 2013;46(6):2275-2281.
24. Okaji R, Taki K, Nagamine S, Ohshima M. Preparation of a unique, multihollow-core honeycomb structure via the unidirectional freezing of a binary solvent system. Journal of Applied Polymer Science. 2013;130(1):526-534.
25. Okaji R, Sakashita S, Tazumi K, Taki K, Nagamine S, Ohshima M. Interconnected Pores on the Walls of a Polymeric Honeycomb Monolith Structure Created by the Unidirectional Freezing of a Binary Polymer Solution. Journal of Materials Science. March 1 2013;48(5):2038-2045.
26. Okaji R, Taki K, Nagamine S, Ohshima M. Preparation of porous honeycomb monolith from UV-curable monomer/dioxane solution via unidirectional freezing and UV irradiation. Journal of Applied Polymer Science. 8/15 2012;125(4):2874-2881.
27. Ishikawa T, Taki K, Ohshima M. Visual Observation and Numerical Studies of N2 vs. CO2 Foaming Behavior in Core-back Foam Injection Molding. Polymer Engineering and Science. April 2012;52(4):875-883.
28. Taki K, Nakamura T. Effects of curing conditions and formulations on residual monomer contents and temperature increase of a model UV gel nail formulation. J. Cosmet. Dermatolog. Sci. Appl. 2011;1(4):111-118.
29. Taki K, Kitano D, Ohshima M. Effect of Growing Crystalline Phase on Bubble Nucleation in Poly(L-Lactide)/CO2 Batch Foaming. Industrial & Engineering Chemistry Research. 2011;50(6):3247-3252.
30. Sharudin RWB, Nabil A, Taki K, Ohshima M. Polypropylene -dispersed domain as potential nucleating agent in PS and PMMA solid-state foaming. Journal of Applied Polymer Science. Jan 2011;119(2):1042-1051.
31. Nagamine S, Ishimaru S, Taki K, Ohshima M. Fabrication of carbon-core/TiO2-sheath nanofibers by carbonization of poly(vinyl alcohol)/TiO2 composite nanofibers prepared via electrospinning and an interfacial sol–gel reaction. Materials Letters. Oct 2011;65(19-20):3027-3029.
32. Taki K, Okumura S. Production of Porous Polymeric Films with Unimodal or Bimodal Pore-Size Distributions via Depressurization- and Photopolymerization-Induced Bubble Nucleation in Low-Viscosity UV-Curable Monomer/High-Pressure CO2 Solutions. Macromolecules. 2010;43(23):9899-9907.
33. Todo M, Park JE, Kuraoka H, Kim JW, Taki K, Ohshima M. Compressive deformation behavior of porous PLLA/PCL polymer blend. Journal of Material Science. May 22 2009;44(15):4191-4194.
34. Kim JW, Taki K, Nagamine S, Ohshima M. Preparation of Porous Poly(L-lactic acid) Honeycomb Monolith Structure by Phase Separation and Unidirectional Freezing. Langmuir. 2009;25(9):5304-5312.
35. Kim JK, Taki K, Nagamine S, Ohshima M. Preparation of a polymeric membrane with a fine porous structure by dry casting. Journal of Applied Polymer Science. March 5 2009;111(5):2518-2526.
36. Adachi H, Taki K, Nagamine S, Ohshima M. Supercritical carbon dioxide assisted electroless plating on thermoplastic polymers. The Journal of Supercritical Fluids. June 2009;49(2):265-270.
37. Todo M, Kuraoka H, Kim JK, Taki K, Ohshima M. Deformation behavior and mechanism of porous PLLA under compression. Journal of Material Science. August 2008;43(16):5644-5646.
38. Taki K, Waratani Y, Ohshima M. Preparation of nanowells on a PS-b-PMMA copolymer thin film by CO2 treatment. Macromolecular Materials and Engineering. July 9 2008;293(7):589-597.
39. Taki K. Experimental and numerical studies on the effects of pressure release rate on number density of bubbles and bubble growth in a polymeric foaming process. Chemical Engineering Science. July 2008;63(14):3643-3653.
40. Otsuka T, Taki K, Ohshima M. Nanocellular foams of PS/PMMA polymer blends. Macromolecular Materials and Engineering. Jan 14 2008;293(1):78-82.
41. Nakai S, Taki K, Tsujimura I, Ohshima M. Numerical simulation of a polypropylene foam bead expansion process. Polymer Engineering and Science. Jan 2008;48(1):107-115.
42. Kim JW, Taki K, Nagamine S, Ohshima M. Preparation of poly(L-lactic acid) honeycomb monolith structure by unidirectional freezing and freeze-drying. Chemical Engineering Science. 2008;63(15):3858-3863.
43. Kim JK, Taki K, Nagamine S, Ohshima M. Periodic porous stripe patterning in a polymer blend film induced by phase separation during spin-casting. Langmuir. 2008;24(16):8898-8903.
44. Ogawa H, Ito A, Taki K, Ohshima M. A new technique for foaming submicron size poly(methyl methacrylate) particles. Journal of Applied Polymer Science. 2007;106(4):2825-2830.
45. Kim JK, Taki K, Ohshima M. Preparation of a unique microporous structure via two step phase separation in the course of drying a ternary polymer solution. Langmuir. 2007;23(24):12397-12405.
46. Funami E, Taki K, Ohshima M. Density measurement of polymer/CO2 single-phase solution at high temperature and pressure using a gravimetric method. Journal of Applied Polymer Science. 2007;105(5):3060-3068.
47. Taki K, Tabata K, Kihara S-i, Ohshima M. Bubble coalescence in foaming process of polymers. Polymer Engineering and Science. 2006;46(5):680-690.
48. Taki K, Nitta K, Kihara S-i, Ohshima M. CO2 foaming of poly(ethylene glycol)/polystyrene blends: Relationship of the blend morphology, CO2 mass transfer, and cellular structure. Journal of Applied Polymer Science. 2005;97(5):1899-1906.
49. Taki K, Yanagimoto T, Funami E, Okamoto M, Ohshima M. Visual observation of CO2 foaming of polypropylene-clay Nanocomposites. Polymer Engineering and Science. June 2004;44(6):1004-1011.
50. 大槻安彦, 金井俊孝, 瀧健太郎, 大嶋正裕. 発泡成形における気泡成長の粘弾性解析. プラスチック成形加工学会誌. 2003;15(9):638-645.
51. Taki K, Nakayama T, Yatsuzuka T, Ohshima M. Visual observations of batch and continuous foaming processes. Journal of Cellular Plastics. 2003;39(2):155-169.
52. 勝沢英夫, 瀧健太郎, 宮本雄史, 松永祐治, 野田弘之, 日吉公男. 酸化チタン充填紙の光触媒能に与えるカレンダリングの効果. 紙パルプの技術. June 30 2002;52(3・4合併号):18-23.